GETA Blog

Exam Number/Code : 350-021

Exam Name : CCIE SP Cable Qualification Exam

Questions and Answers :399 Q&As

Update Time:2010-05-23

 

With Testsoon.com, its now possible to easily pass Cisco 350-021 Certification Exam named CCIE SP Cable Qualification Exam in your first attempt. Testsoon will help you prepare well for your coming Cisco 350-021 Certification Exam with confidence. Testsoon Cisco CCIE SP Cable Qualification Exam Certification Exam Training, Testsoon Practice Questions and Answers with Explanations, Practice Testing Software and other Testsoon 350-021 Training Tools are available to you at Testsoon.

 

Presently, up to ten thousand people take the Cisco certification examination, thousands of people take Cisco Certification and more and more people take the 350-021 dumps Authentication examination. Among the many candidates, students and people who will participate in the working soon constitute a major force in the ranks of textual research.

 

testsoon offers free demo for CCIE 350-021 exam (CCIE SP Cable Qualification Exam). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

 

Download 350-021 PDF
Download TestSoon Test Engine

 

　

　

Exam        :  Cisco 350-021

Title    :  CCIE SP Cable Qualification Exam

 

 

1. If there are two different headends with two different frequencies available sharing the same plant, what frequency will the two groups of cable modems, which are brand new, and have never been on-line, lock on?

A. They will lock on the frequency configured on the linecard.

B. They will lock on the frequency configured on the upconverter.

C. They will lock on the first frequency they find.

D. They will lock on the lowest frequency.

E. They will lock on the last frequency remembered in ram.

Answer: C

 

2. Which are HFC cable television forward path networks aligned to provide? (multiple answer)

A. For asymmetrical gain since the downstream and upstream bandwidths are also asymmetrical

B. For unity gain with a fixed input level and varying output levels adjusted by the selection of a fixed value attenuator and equalizer at the output stage in each of the forward amplifiers in the network

C. For unity gain with a fixed output level and varying input levels adjusted by the selection of a fixed value attenuator & equalizer at the input stage of each of the forward amplifiers in the network

D. It is not necessary to align the forward path amplifiers since the CMTS will automatically compensate for forward path gain discrepancies.

E. For unity gain and are level compensated by automatic gain and slope control systems utilizing RF pilot reference carriers

Answer: CE

 

3. A network administrator is using debug commands to check the performance of a network. What steps can the administrator take to ensure that the “debug” will not require too much CPU, or at least that she will not have to reboot the router to disable debug? (multiple answer)

A. Make the debug command as specific as possible

B. Use the max-time parameter of the debug command

C. In configuration mode, enter scheduler interval 15

D. Configure a loopback to channel debug traffic

Answer: AC

 

4. Cisco recommends the use of a headend-grade coaxial cable or a quad-shield coaxial cable with a minimum of 60% + 40% braid and double foil insulation to connect the cable modem cards to the HFC network. The center conductor must be straight and extend 1/8 inch (3.2 mm) beyond the end of the connector, and the connector should be securely crimped to the cable. Select three recommended cable types that can be used to connect the Cisco uBR7200 series universal broadband routers: (multiple answer)

A. RG 58

B. RG 59

C. RG 59/U

D. RG 6

E. RG 7

Answer: BCD

 

5. A router is set to boot from flash, but cannot find boot commands in the configuration. Also, valid files do not exist in the default flash device. The router will:

A. Boot from ROM, since there are no valid sources

B. Try to boot from the network, using a default filename

C. Terminate the boot process with an error message

D. Try to boot from the network, then boot from ROM as a backup

Answer: D

 

6. HFC cable television return path networks are aligned to provide: (multiple answer)

A. Asymmetrical gain since the downstream and upstream bandwidths are also asymmetrical

B. Unity gain with a fixed input level and varying output levels adjusted by the selection of a fixed value attenuator and equalizer at the output stage in each of the return amplifiers in the network

C. Unity gain with a fixed output level and varying input levels adjusted by the selection of a fixed value attenuator and equalizer at the input stage of each of the return amplifiers in the network

D. Cable modems the ability to power range comfortably within their output power dynamic range

E. It is not necessary to align the return path amplifiers since the CMTS will automatically adjust the cable modem transmit power levels.

Answer: BD